Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 250
Part: Clock

In this tutorial, you will see how to set the time on a Yamaha XMAX scooter, a very simple operation to perform after replacing the battery or when the time changes. First, insert the key but leave it in the initial position, then move the selector below the right handle to the "Trip" position, which is to the left. At the same time, switch on the instrument panel and keep the selector in position until the time starts flashing. Finally, adjust the hours and minutes using the same selector.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on the Yamaha XMAX 250 Scooter?
How to Set the Time on the Yamaha XMAX 250 Scooter?
Xmax 250 In this tutorial, see how to set the time on the Yamaha XMAX 250 scooter. This operation is extremely simple and quick, for example, to perform after…
How to adjust the time on the Yamaha XMAX 250 scooter?
How to adjust the time on the Yamaha XMAX 250 scooter?
Xmax 250 In this tutorial we can see how to adjust the time on the Yamaha XMAX 250 scooter, an extremely simple and quick operation, to be carried out for exa…
How to adjust the time on the Yamaha XMAX 250 scooter?
How to adjust the time on the Yamaha XMAX 250 scooter?
Xmax 250 In this tutorial, we can see how to adjust the time on the Yamaha XMAX 250 scooter, a very simple and quick operation to be carried out, for example,…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos