Do it yourself
| ||||
|
Model: Yamaha Mt 125
To reset the Service light on the Yamaha MT 125, you need to turn on the instrument panel by turning the key in its ignition block: this will allow you to press and hold the button located at the bottom right of the instrument panel for a few seconds. Then, you need to press and hold the button located at the bottom left of the panel: this will cause the light to start flashing and you should keep the button pressed until it disappears completely. Then, releasing the button will allow you to verify that the reset has been done correctly.
Posted on 29 April 2023 by ScegliAuto
|
How do you replace the front headlight of the Husqvarna 701?The procedure for replacing the front headlight on the Husqvarna 701 involves loosening the four 30 torx screws located on the sides of the headlight, between the front wheel fork and the plastic panel. Once all the screws are loosened, it will be possible to remove the plastic front cover to which the headlight, containing the bulbs, is attached. It will be necessary to disconnect the connector and remove the old bulb from its housing. Then it will be possible to insert the new bulb into its proper seat and connect the connector. Finally, it will be necessary to reassemble the headlight assembly and secure the fairing. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |