Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The Service indicator that appears on the instrument panel of the Yamaha MT 125 can be reset by turning on the instrument panel by turning the appropriate key inside the ignition switch: in this way it will be possible to hold down for a few seconds the button located at the bottom right of the instrument panel. Then, you will need to hold down the button at the bottom left of the panel: in this way you will notice that the indicator light will start flashing and you will need to keep the button pressed until it disappears completely. Then, releasing the button you can verify that the reset has been completed.

Posted on 18 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service on the Yamaha MT-125?
How to Reset the Oil Service on the Yamaha MT-125?
Mt 125 Resetting the oil service on the Yamaha MT-125 is an extremely simple and quick operation. First, ensure you have completed all scheduled maintenance…
How to Reset the Service Light on the Yamaha MT 125?
How to Reset the Service Light on the Yamaha MT 125?
Mt 125 To reset the Service light on the Yamaha MT 125, turn the ignition key to switch on the instrument panel. Hold down the button located at the bottom …
How to reset the service on the Yamaha MT-125?
How to reset the service on the Yamaha MT-125?
Mt 125 In this tutorial, we can see how to reset the service on the Yamaha MT-125, an extremely simple and quick operation, to be carried out only once all …

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos