|
Do it yourself
| |||
| ||||
How to Replace the Coolant in a Yamaha MT-07
Model: Yamaha Mt 07
Video tutorial
Today's instructions will show you how to drain and refill the coolant in a Yamaha MT-07. First, place the motorcycle on its stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then, unscrew the radiator filler cap, washing the system if necessary. At this point, refill with new antifreeze suitable for your radiator; then start the engine, topping up if necessary!
Updated on 12 August 2026 by ScegliAuto
Related tutorials
Mt 07
To replace the coolant in the Yamaha MT-07, loosen the drain plug of the cooling system, located at the bottom of the pipe connected to the water pum…
Mt 07
To set the clock on the Yamaha MT-07, turn on the instrument panel by turning the key in the ignition switch: once the panel is on, press and hold th…
Mt 07
In this tutorial, you will see how to replace the front headlamp on a Yamaha MT-07, a very simple and quick operation. First, ensure that the key is …
|
How to Reset the Service Light on a Vespa Sprint 150?
To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
