Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Fairing on the Yamaha FZ6?

Model: Yamaha Fz6
Part:

Video tutorial

In this tutorial, you will see how to remove the front fairing on the Yamaha FZ6, a very simple and quick operation. First, remove the two side plastic covers by unscrewing the corresponding bolts with a 4 mm hex key. Next, unscrew the mounting nuts of both wing mirrors and remove them from the support.

Continue by unscrewing the four bolts positioned around the perimeter of the headlamp. Grasp the fairing and, pulling it outward, separate it from the frame.

To fit any replacement part, simply follow the reverse procedure.


Updated on 17 August 2026 by ScegliAuto


Related tutorials

Fz6 In this video, you will see how to remove and replace the battery on a Yamaha FZ6, including the Fazer version. First, remove the motorcycle seat by …
Fz6 In this video, you can see where the fuses are located on the Yamaha FZ6, useful if you need to check the fuse of a malfunctioning device. As shown, …
Fz6 Discover how to remove the rear wheel of the Yamaha FZ6, including the Fazer version, by following the instructions below. First, place the central s…

How to Replace the Fuel Filter on the MV Agusta Brutale 920?

To replace the fuel filter on the MV Agusta Brutale 920, loosen the screws that secure the fuel tank to its housing: once the screws securing the tank, hoses, and connectors have been loosened, you can completely remove the tank and then locate the fuel pump underneath. At this point, loosen the screws that secure the pump, remove it, and locate the fuel filter attached to it: this will allow you to replace it by inserting the new replacement part.

Watch the video!


by ScegliAuto

More videos