Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Warning Light on a Yamaha XMAX 300 Scooter?

Model: Yamaha Xmax 300
Part: Warning light – error code

Video tutorial

In this tutorial, see how to reset the engine warning light on a Yamaha XMAX 300 scooter, a very simple and quick operation to perform only after resolving the issue that caused it to light up. For this, you will also need the Bluetooth scanner shown in the video.

Start by removing the front fairing of the scooter and locating the OBD socket, then connect the scanner and interface it with your smartphone using the appropriate app. Next, perform a scan for errors, select the "Clear" option, and restart the instrument cluster.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

Resetting the Service Warning on Yamaha Xmax 300
Resetting the Service Warning on Yamaha Xmax 300
Xmax 300 Today's instructions will allow us to reset the service warning on the Yamaha Xmax 300 scooter. First, place the scooter on its stand and turn on the…
How to Remove the Engine Warning Light on a Yamaha XMAX 300 Scooter?
How to Remove the Engine Warning Light on a Yamaha XMAX 300 Scooter?
Xmax 300 In this tutorial, see how to remove the engine warning light on a Yamaha XMAX 300 scooter, a very simple and quick operation. Before proceeding, you …
Resetting the Belt Change Warning Light on a Yamaha Xmax 300
Resetting the Belt Change Warning Light on a Yamaha Xmax 300
Xmax 300 This guide will show you how to reset the belt change warning light on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and …

How to replace the headlight bulb in the Triumph Tiger 800?

Replacing the headlight bulb in the Triumph Tiger 800, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then locate the large cap on the back of the headlamp and unscrew it. Next, disconnect the power connector by pulling it outwards, unclip the metal clip, and remove the old bulb from the housing. At this point, insert the replacement, avoiding direct contact with the glass, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos