Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Warning on Yamaha Xmax 300

Model: Yamaha Xmax 300
Part: Service warning light

Video tutorial

Today's instructions will allow us to reset the service warning on the Yamaha Xmax 300 scooter. First, place the scooter on its stand and turn on the ignition; use the buttons located on the left of the handlebars to navigate to the settings and then to the service menu, as shown in the video.

At this point, confirm the reset of the engine oil warning light, thus resetting the oil life mileage counter; finally, exit the settings to save the changes made, turning off the ignition and starting the engine!


Posted on 6 April 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on Yamaha Xmax 300
Resetting the Service Light on Yamaha Xmax 300
Xmax 300 These brief steps will allow you to reset the service light for the regular maintenance oil change on the Yamaha Xmax 300 scooter. First, place the s…
How to reset the service light on the Yamaha Xmax 300
How to reset the service light on the Yamaha Xmax 300
Xmax 300 Today's procedure will allow us to reset the maintenance reminder for the oil change service of the Yamaha Xmax 300 scooter. First, we put the scoote…
Resetting the Maintenance Warning on Yamaha Xmax 300
Resetting the Maintenance Warning on Yamaha Xmax 300
Xmax 300 The following steps will show you how to reset the regular maintenance warning on the Yamaha Xmax 300 scooter. First, place it on the centre stand an…

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos