Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 300
Part: Key

This guide shows you the useful steps to disassemble and replace the battery of the remote control key for the Yamaha Xmax 300 scooter. First, take the remote control in hand and start prying on the sides to open it into two parts; then access the electronic board and the battery, which you will remove, as illustrated in the video. At this point, install the new battery (in this case, a CR 2021 3V) in the correct orientation; then reassemble the remote control, ensuring that the alarm button works correctly!

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Yamaha Xmax 300
How to Replace the Battery on a Yamaha Xmax 300
Xmax 300 Today, we will see the instructions that will allow us to remove and replace the battery of the Yamaha Xmax 300 scooter. First, place the scooter on …
How to Replace the Remote Control Battery on a Yamaha XMAX 300 Scooter?
How to Replace the Remote Control Battery on a Yamaha XMAX 300 Scooter?
Xmax 300 In this tutorial, see how to replace the remote control battery on the Yamaha XMAX 300 scooter, a very simple and quick operation. For this, you will…
How to replace the battery of the Yamaha Xmax 300 key
How to replace the battery of the Yamaha Xmax 300 key
Xmax 300 In the following guide, we will describe all the necessary steps to successfully replace the button battery inside the key of your Yamaha Xmax 300. F…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos