Do it yourself
| ||||
|
Model: Yamaha Mt 125
In order to set the clock of the Yamaha MT 125, you need to turn on the instrument panel by rotating the appropriate key inside the ignition switch. Once the instrument panel is turned on, you can hold down both buttons located on the left side of the panel. By holding down the buttons, you will notice that the number indicating the hours will start flashing: it can be adjusted with individual touches of the right button. You can then confirm the input with the left button and you can modify the minutes following the same procedure.
Posted on 5 December 2023 by ScegliAuto
|
How to change the engine oil of Derbi FdsLet's find out below the instructions on how to carry out the routine maintenance service, replacing the engine oil and the oil filter, of the Derbi Fds. First of all, we put the stand on our bike and start to drain the engine oil, unscrewing the vent bolt that we find under the engine; let the old oil drain in a container for about ten minutes. At this point we unscrew the filler cap and carry out the new top up; we use the oil with the right characteristics, finally checking the oil level using the dipstick! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |