Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Fz 6
Part: Spark plugs

To replace the spark plugs on the Yamaha FZ6R, you need to loosen the screws that secure the fuel tank to its housing. The tank can then be completely removed by disconnecting the hoses and connectors attached to it. Once the tank is removed, you will locate the coils, which can then be extracted from their housing. Underneath them, you will find the spark plugs, which can be removed from their seats using a suitable socket wrench. This way, you can install the new spark plugs and reassemble all the components that were removed earlier.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a Yamaha FZ6
How to Replace the Clutch on a Yamaha FZ6
Fz 6 To replace the clutch on your Yamaha FZ6, loosen the bolts securing the cover located on the right side of the bike, halfway up. Once the cover bolts…
How to Replace the Clutch on a Yamaha FZ6 R?
How to Replace the Clutch on a Yamaha FZ6 R?
Fz 6 To replace the clutch on the Yamaha FZ6 R, loosen the bolts securing the circular cover that contains the clutch, located on the right side of the bi…
Removing the Original Engine Air Filter from a Yamaha Fz6
Removing the Original Engine Air Filter from a Yamaha Fz6
Fz 6 Remove the original engine air filter from a Yamaha Fz6. Follow this guide to proceed with the replacement. Position the motorcycle on a centre stand…

How to Replace the Battery of the Kymco Agility 125?

To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel.

Watch the video!


by ScegliAuto

More videos