Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Morphous
In this tutorial, you can see how to reset the belt service on the Yamaha Morphous scooter, a very simple and quick operation. Of course, this procedure should only be performed after completing the required scheduled maintenance work. First, open the front fairing panel by unscrewing the various indicated screws, then locate the white connector and set it aside. Next, insert the key, turn on the instrument panel, and keep the connector disconnected for at least 10 seconds. Once reconnected, restart the panel and check that the reset has been successful.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Belt Service Light on the Yamaha XMAX 250 Scooter?
How to Reset the Belt Service Light on the Yamaha XMAX 250 Scooter?
Xmax 250 In this tutorial, we will see how to reset the belt service light on the Yamaha XMAX 250 scooter, a very simple and quick operation. Before doing thi…
How to reset the belt service on the Yamaha XMAX 400 scooter?
How to reset the belt service on the Yamaha XMAX 400 scooter?
Xmax 400 In this tutorial, we can see how to reset the belt service on the Yamaha XMAX 400 scooter, an extremely simple and quick operation. This service is i…
How to reset the belt change on the Yamaha Xmax 400
How to reset the belt change on the Yamaha Xmax 400
Xmax 400 Following these brief and simple steps, we will see how to reset the belt change indicator light on the Yamaha Xmax 400 scooter. First, we put the sc…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos