Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 09
Part: Clock

In this tutorial, see how to set the time on a Yamaha MT-09, a very simple and quick operation to perform, for example, after disconnecting the battery or when switching to daylight saving time. First, insert the key and turn on the instrument panel, then press and hold the "Select" button together with the "Reset" button for about 10 seconds, or until the time starts to flash. Once done, change the hour by repeatedly pressing the "Reset" button, adjust the minutes with the "Select" button, and save the setting by holding down the same button.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on a Yamaha MT 09
How to Set the Time on a Yamaha MT 09
Mt 09 If the time displayed on your Yamaha MT 09 is incorrect and you want to change it manually, follow these steps. First, turn off your motorcycle and p…
How to Set the Clock on a Yamaha MT-09?
How to Set the Clock on a Yamaha MT-09?
Mt 09 To set the clock on the Yamaha MT-09, turn the key to switch on the instrument panel, allowing you to use the controls on the panel itself: press and…
How do you set the clock on the Yamaha MT-09?
How do you set the clock on the Yamaha MT-09?
Mt 09 The clock on the Yamaha MT-09 can be adjusted by turning on the instrument panel, inserting the key into the ignition switch: once the instrument pan…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos