Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, we see how to change oil and spark plug on a Yamaha N-Max 155: we will remove the oil from the bottom, here we have a 19 cap that we will have to unscrew; prepare a container to drain the oil, which we will then dispose of at an authorized center. Wait for all the oil to drain before putting the cap back in place. The new oil, instead, must be inserted laterally, from the cap located near the exhaust pipe. Get a funnel to fill the oil tank and proceed to pour about 900 ml of SAE 20W50 oil; then check that the oil is at the right level. Now let's change the spark plug: we will have to remove the side protection on the right side: the spark plug is located on the left side of the screen, in a dimly lit but easily accessible place. We remove it and replace it easily; put back the cap and the partition and we're done.

Posted on 27 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Yamaha N Max 155
How to Replace the Battery on a Yamaha N Max 155
N Max 155 This guide briefly outlines the instructions needed to remove and replace the battery on the Yamaha N Max 155 scooter. First, place your scooter on t…
How to Replace the Key Battery of a Yamaha N Max
N Max 155 Replacing the battery in your Yamaha N Max key is a straightforward task. To complete it correctly, follow these steps. First, take the key and remov…
How to Reset the Oil Service on the Yamaha NMAX Scooter?
How to Reset the Oil Service on the Yamaha NMAX Scooter?
N Max 155 In this tutorial, you will see how to reset the oil service on the Yamaha NMAX scooter, a very simple and quick operation to perform only after compl…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos