Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery of the Yamaha XSR 900

Model: Yamaha Xsr 900
Part: Battery

Video tutorial

In a simple and brief manner, we will see how to remove and replace the battery of the Yamaha XSR 900 motorcycle. First, place the motorcycle on its stand and start by removing the rider's seat; underneath, you will find the battery, where you will disconnect both terminals (positive and negative) to remove it from its compartment, as shown in the video.

At this point, install the new battery of the correct type and with the same amperage, inserting it the right way; make the electrical connection and finally refit the rider's seat!


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to Remove the Battery from the Yamaha XSR 900?
How to Remove the Battery from the Yamaha XSR 900?
Xsr 900 In this tutorial, see how to remove the battery from the Yamaha XSR 900, a very simple and quick operation. Before proceeding, ensure the key is not …
How to Replace the Front Headlight on a Yamaha XSR 900?
How to Replace the Front Headlight on a Yamaha XSR 900?
Xsr 900 In this tutorial, you will learn how to replace the front headlight on a Yamaha XSR 900, a very simple and quick operation. Before proceeding, ensure…
How to Change the Engine Oil in a Yamaha XSR 900
How to Change the Engine Oil in a Yamaha XSR 900
Xsr 900 Changing the engine oil in the Yamaha XSR 900, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the engine i…

How to replace the headlight bulb in the Triumph Tiger 800?

Replacing the headlight bulb in the Triumph Tiger 800, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then locate the large cap on the back of the headlamp and unscrew it. Next, disconnect the power connector by pulling it outwards, unclip the metal clip, and remove the old bulb from the housing. At this point, insert the replacement, avoiding direct contact with the glass, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos