Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Yamaha NMAX 155 scooter, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath the scooter, locate the drain hole bolt and unscrew it using a 17mm socket wrench. Let all the oil in the system drain out, clean the filter from any dirt residue and reassemble everything. At this point, all that remains is to pour the new oil through the appropriate upper hole.

Posted on 8 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time on the Yamaha NMAX 155 scooter?
How to adjust the time on the Yamaha NMAX 155 scooter?
Nmax 155 In this tutorial, we can see how to adjust the time on the Yamaha NMAX 155 scooter, an extremely simple and quick operation to be carried out, for ex…
How to replace the front brake pads on the Yamaha NMAX 155 scooter?
How to replace the front brake pads on the Yamaha NMAX 155 scooter?
Nmax 155 In this tutorial we can see how to replace the front brake pads on the Yamaha NMAX 155 scooter, an extremely simple and quick operation. First of all…
How to Change the Engine Oil on a Yamaha Nmax 155
How to Change the Engine Oil on a Yamaha Nmax 155
Nmax 155 Below are the instructions to change the engine oil while performing maintenance on the Yamaha Nmax 155 scooter. First, place the scooter on its stan…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos