Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs in the Acura ILX

Model: Acura Ilx MK 1 - Years 2013-2022
Part: Spark plugs

In this video tutorial, you will see how to remove and replace the spark plugs in the Acura ILX engine, following the instructions below. First, open the hood of your car and start removing the upper plastic cover; then disconnect the electrical connectors from the spark plugs, using a socket wrench with an extension to unscrew and remove the four spark plugs, as shown in the video. At this point, replace the spark plugs with new ones that have the same thread and heat rating, following the video to the end!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on an Acura ILX?
How to Replace the Air Filter on an Acura ILX?
Acura Ilx (2013-2022 / MK 1) To replace the air filter on an Acura ILX, open the hood to access the components inside the engine compartment. In the upper right part of the engin…
How to Replace the Headlight Bulb of the Acura ILX?
How to Replace the Headlight Bulb of the Acura ILX?
Acura Ilx (2013-2022 / MK 1) To replace the headlight bulb of the Acura ILX, open the hood to access the components inside the engine compartment. Once the hood is open, remove t…
Replacement of the cabin air filter of the Acura ILX
Replacement of the cabin air filter of the Acura ILX
Acura Ilx (2013-2022 / MK 1) These brief instructions will allow us to disassemble and replace the cabin air filter or pollen filter of the Acura ILX. First, we get on board the …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos