Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs of the Acura RDX 2.3L Turbo

Model: Acura Rdx MK 1 - Years 2006-2012
Part: Spark plugs

In this guide, we will see the instructions on how to remove and replace the spark plugs of the Acura RDX 2.3L Turbo engine. First, open the hood of your car and begin removing the plastic engine cover; then unscrew the mounting screws of the manifold, which are located at the top and on the sides, as shown in the video. At this point, disconnect the spark plug coils using a socket wrench with an extension to unscrew and remove them; now replace them with new ones that have the same thread, screwing them in by hand and tightening gently!

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in the Acura RDX?
How to Replace the Remote Battery in the Acura RDX?
Acura Rdx (2013-2018 / MK 2) As you can see in this tutorial, replacing the remote battery in the Acura RDX is a very simple and quick operation. To do this, you will need a repl…
How to Install Roof Railing on the Acura RDX
How to Install Roof Railing on the Acura RDX
Acura Rdx (2019-2026 / MK 3) In this video, you will learn how to install roof railing on the Acura RDX. Before proceeding with the installation, make sure you have purchased the…
How to Remove the Sunshade from an Acura RDX?
How to Remove the Sunshade from an Acura RDX?
Acura Rdx (2013-2018 / MK 2) In this video, you can see how to remove a sunshade panel from a 2015 Acura RDX. The same procedure can be used for all vehicles of the same model pr…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos