Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on an Acura RDX?

Model: Acura Rdx MK 1 - Years 2006-2012
Part: Key

Replacing the remote battery on an Acura RDX, as shown in this tutorial, is an extremely simple and cost-effective task. You will need a small Phillips screwdriver, a flathead screwdriver, and a replacement CR1616 battery. First, remove the screw located along the bottom edge of the remote, then take out the module containing the buttons and open it by prying along the side seam. Once done, remove the old battery and insert the replacement, ensuring the negative terminal is facing up.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery in the Acura RDX?
How to Replace the Remote Battery in the Acura RDX?
Acura Rdx (2013-2018 / MK 2) As you can see in this tutorial, replacing the remote battery in the Acura RDX is a very simple and quick operation. To do this, you will need a repl…
How to Replace the Key Fob Battery on an Acura RDX 2
How to Replace the Key Fob Battery on an Acura RDX 2
Acura Rdx (2013-2018 / MK 2) In this guide, we will discover how to correctly replace the button battery in the key fob of your second-generation Acura RDX (2013-2018). First, ta…
How to Replace the Key Battery on an Acura RDX
How to Replace the Key Battery on an Acura RDX
Acura Rdx (2013-2018 / MK 2) If you need to replace the remote key battery on this vehicle, you can find simple instructions on how to proceed in the description below and also h…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos