Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the Alfa Romeo Mito car radio

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

Video tutorial

In a few simple steps, we will see the process of disassembling and replacing the original car radio of the Alfa Romeo Mito. First, we get into the car and start inserting the appropriate extraction tools into the side holes of the car radio; then we remove the car radio from the dashboard, disconnecting all the electrical connectors on the back, as shown in the video.

At this point, we carry out the repair or replacement of the car radio, compatible with our car; we make any necessary modifications to the system and reassemble everything, checking its operation.


Posted on 23 April 2025 by ScegliAuto


Related tutorials

Removing the Original Radio from Alfa Romeo Mito
Removing the Original Radio from Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video, you will learn how to remove the radio from the Alfa Romeo Mito. First, you will need specific tools: U-shaped hooks designed specific…
How to Remove the Blue & Me Control Unit in the Alfa Romeo MiTo
How to Remove the Blue & Me Control Unit in the Alfa Romeo MiTo
Alfa Romeo Mito (2008-2018 / MK 1) Learn how to remove the radio and the Blue & Me control unit in the Alfa Romeo MiTo. This tutorial also applies to other models in the group. Insert …
How to Remove the Uconnect 5 Radio in an Alfa Romeo Mito
How to Remove the Uconnect 5 Radio in an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video tutorial, you will see the procedure to remove the Uconnect 5 radio in an Alfa Romeo Mito, following a few simple steps that will allow…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos