Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment of an Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Dashboard

Video tutorial

In this video, we will see how to remove the glove compartment of an Alfa Romeo Mito. Open the glove compartment and unclip the end stop arms, then unscrew the fastening screws with a screwdriver. After completing the previous steps, unscrew the side screws in the glove compartment and extract the plastic door from it. Unscrew the screws again, and after disconnecting the power cables, pull the glove compartment out of the dashboard.

Then disconnect the glove compartment light from the connector and remove the glove compartment from the dashboard.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Fan from an Alfa Romeo MiTo
How to Remove the Cabin Fan from an Alfa Romeo MiTo
Alfa Romeo Mito (2008-2018 / MK 1) Before you can start, sit in the front passenger seat of your Alfa Romeo MiTo. Begin by unclipping and removing the lower right cover of the centre c…
Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…
How to Remove the Spark Plugs from a 1.4 Turbo Engine of an Alfa Romeo Mito
How to Remove the Spark Plugs from a 1.4 Turbo Engine of an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Before you can start, open the bonnet of your Alfa Romeo Mito. Begin by removing the upper engine cover. This will give you access to the spark plug …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos