Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan from an Alfa Romeo MiTo

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Blower motor

Before you can start, sit in the front passenger seat of your Alfa Romeo MiTo. Begin by unclipping and removing the lower right cover of the centre console. Next, move the carpet located at the bottom of the glove compartment. This will give you access to the cabin fan. At this point, unscrew and remove the screws that secure the fan in place, and then disconnect the power connector. Once you have completed this step, you can remove the fan, and you will have finished the disassembly.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cabin Ventilation Fan on an Alfa Romeo Mito
How to Remove the Cabin Ventilation Fan on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video, see how to remove the cabin ventilation fan on an Alfa Romeo Mito. Use a plastic lever to remove the plastic cover of the right centra…
Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…
Where are the fuses located in the Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) The fuses of the Alfa Romeo MiTo are contained inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos