Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seats from an Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Seat

Video tutorial

This guide explains how to remove and replace the front seats from an Alfa Romeo Mito, following the instructions below. First, open the front doors of your car and start by removing the plastic cover found under the seat; then disconnect the electrical connector located underneath, as shown in the video.

At this point, use a spanner or a Torx screwdriver to unscrew all the bolts on the seat rails, allowing you to lift and remove the seats; replace and install new seats if necessary, applying the reverse procedure!


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Seat Handle on an Alfa Romeo Mito
How to Replace the Front Seat Handle on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Before you start, open the front door of your Alfa Romeo Mito. Begin by lifting and holding the handle. This will expose the Allen screw that secures…
How to Remove the Headlamp on the Alfa Romeo Mito
How to Remove the Headlamp on the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Today, in this video tutorial, you will see the main instructions that will allow you to remove and replace the front headlights on the Alfa Romeo Mi…
How to Replace the Clutch on the Alfa Romeo Mito 1.4
How to Replace the Clutch on the Alfa Romeo Mito 1.4
Alfa Romeo Mito (2008-2018 / MK 1) Today's guide will illustrate the procedure for removing and replacing the clutch on the Alfa Romeo Mito 1.4, following the instructions below. First…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos