Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the lower door light bulb of the Alfa Romeo Giulietta.

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Light bulb

Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the lower bulb of the door (or welcome light) of the Alfa Romeo Giulietta. First, we open the front door of the car and start removing the plastic light fixture of the bulb, levering on the side slot; then we disconnect the electrical connector of the light and replace the bulb with the new one (of the right type and with the same attachment), as shown in the video.

All that's left is to fix the light fixture on the door panel, checking its operation!


Posted on 11 May 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Unlike many other car models, the air filter of the Alfa Romeo Giulietta is not located in the upper area of the engine bay but rather in the lower a…
Where to Find the OBD Port of the Alfa Romeo Giulietta
Where to Find the OBD Port of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) If you own an Alfa Romeo Giulietta and want to find the OBD port, follow the steps outlined in this guide. First, enter the cabin and ensure that the…
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before starting, sit in the driver's seat of your Alfa Romeo Giulietta. Insert and turn the key in the ignition. Next, press and hold the accelerator…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos