Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Cable on an Alfa Romeo 147

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Parking brake

In this video, see how to remove a brake disc to replace the tension cable on an Alfa Romeo 147. Position the car on a column lift, loosen the bolts with a socket spanner, and raise it to a comfortable height for work. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake cable brackets and disconnect the cable. Detach the handbrake cable and unscrew the bolts located under the car's body. Install the new handbrake cable and all associated bolts. Test the proper functioning of the brake.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Handbrake Cable on the Alfa Romeo 147?
How to Replace the Handbrake Cable on the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) To replace the handbrake cable on the Alfa Romeo 147, lift the handbrake lever so that you can detach the gaiter that surrounds it. Under this gaiter…
How to Replace the Brake Button on the Alfa Romeo 147?
How to Replace the Brake Button on the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) This video shows how to replace the handbrake lever button. The car used for this clip is an Alfa Romeo 147, but the same procedure applies to the Al…
Adjusting the Handbrake on Alfa Romeo 147
Adjusting the Handbrake on Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) In today's video, you will learn how to adjust the handbrake on an Alfa Romeo 147, which also applies to most cars with a manual handbrake. First, re…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos