Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Third Brake Light on an Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Tail light

Here’s how to remove the third brake light on an Alfa Romeo Mito. Remove the plastic light with a screwdriver, prying gently. Once the light is free from any constraints, detach it from the spoiler (disconnect the relevant power connectors). Finally, refit the new light: connect the power connector, insert the light into the tailgate (after installing new bulbs) and secure the clips. Test the correct functioning of the lights fitted in the rear light: by operating the appropriate control levers.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear light of the Alfa Romeo Mito
Replacement of the rear light of the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the rear light of the Alfa Romeo Mito. First, we open the rear hatch…
How to Remove the Rear Stop Light of an Alfa Romeo Mito
How to Remove the Rear Stop Light of an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Before you can start, open the boot lid of your Alfa Romeo Mito. Begin by unscrewing and removing the screws that secure the internal cover of the bo…
How to Replace the Dipped Beam Bulb in the Alfa Romeo Mito
How to Replace the Dipped Beam Bulb in the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) This guide shows you clearly and in detail how to replace the dipped beam bulb in the Alfa Romeo Mito. With the instrument cluster off, open the bonn…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos