Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear light of the Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Tail light

Today we will see the instructions that will allow us to disassemble and replace the rear light of the Alfa Romeo Mito. First, we open the rear hatch of the trunk and start removing the plastic cover located behind the headlight; then we unscrew the fixing screw and disconnect the electrical connector of the bulbs, as shown in the video. At this point, if necessary, we replace the brake lights or directly the entire taillight; we install the new rear light and make the electrical connection, then check the operation of all the brake lights.

Posted on 8 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…
How to Remove and Replace the Rear Light on an Alfa Romeo Mito
How to Remove and Replace the Rear Light on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) To remove and replace the rear light on an Alfa Romeo Mito, open the boot lid, remove the cover located at the side of the boot, and unscrew the rear…
How to Remove the Rear Light on the Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) In this video, see how to remove the rear light on the Alfa Romeo MiTo, useful if you need to replace a bulb or the light itself. First, unscrew the …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos