Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight of the Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

Video tutorial

Today, you will learn how to remove the front headlight of the Alfa Romeo Mito. Open the front bonnet and unscrew the securing screws located on the top of the bonnet. Next, remove the side screws located on the wheel arch and slightly unclip the bumper.

Using an 8 mm socket, unscrew the nuts that secure the headlight to the bumper. Disconnect the headlight connector to fully remove it. Reassembly follows the reverse procedure.

In fact, this operation is not only for replacing the front headlight but also for changing the headlight bulb.


Posted on 27 March 2026 by ScegliAuto


Related tutorials

What type of bulbs does the Alfa Romeo Mito use and how to replace them
What type of bulbs does the Alfa Romeo Mito use and how to replace them
Alfa Romeo Mito (2008-2018 / MK 1) Today, you will learn what type of bulbs the Alfa Romeo Mito uses and how to replace them. Firstly, the Alfa Romeo Mito uses H7 bulbs. Now, let’s see…
Replacing Main Beam Bulbs on Alfa Romeo Mito
Replacing Main Beam Bulbs on Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Replacing main beam bulbs on an Alfa Romeo Mito? Let's see how to remove the bulbs from inside the headlamp and how to replace them. Lift the bonnet …
How to Replace the Front Headlamp Bulb on an Alfa Romeo Mito
How to Replace the Front Headlamp Bulb on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Today, we will look at the instructions needed to remove and replace the front headlamp bulb on an Alfa Romeo Mito. First, get inside the vehicle and…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos