Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : How to replace the headlights on the Alfa romeo Mito

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Headlight
Operation: How to replace the headlights on the Alfa romeo Mito

If we want to personalize the car by replacing the front optics and perhaps mounting the eyelid on the same, it is necessary to proceed by following the instructions below: first open the bonnet and remove the bumper. Then with a 10 mm spanner it is necessary to unscrew the screws located above the headlight, also remove the screw located on the side of the car body. At this point it will be possible to pull out the optical group by pulling it forward, proceed to disconnect the clamps located behind it and, if we want to mount an eyelid we will unscrew the front glass of the lighthouse by disassembling the screws placed all around.


Posted on 4 December 2022 by ScegliAuto



Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to locate the precise locations of the fuses on your Alfa Romeo Mi
What kind of lamps does the Alfa Romeo Mito mount and how they are mounted
Alfa Romeo Mito (2008-2018 / MK 1) Today we will tell you what kind of bulbs the Alfa Romeo Mito is fitted with and how to replace them. Let's start by saying that the Alfa Romeo Mito
Replacing high beam bulbs on Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Replacing high beam bulbs on Alfa Romeo Mito? Let's see how the bulbs are removed from inside the lighthouse and how to replace them. We lift the fro

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos