Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on an Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

Video tutorial

Today, we will look at the instructions needed to remove and replace the front headlamp bulb on an Alfa Romeo Mito. First, get inside the vehicle and start by removing the protective cover of the bulb located behind the headlamp unit; then disconnect the electrical connector of the bulb and subsequently remove the dipped beam bulb from the socket, as shown in the video.

At this point, install the new front headlamp bulb of the correct type (in this case, with an H7 socket); check the bulb's operation immediately!


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Replace the Daytime Running Light of the Front Headlamp on an Alfa Romeo Mito
How to Replace the Daytime Running Light of the Front Headlamp on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Follow this brief and simple guide to remove and replace the position bulb or daytime running light of the front headlamp on an Alfa Romeo Mito. Firs…
How to Replace the Front Headlight of the Alfa Romeo Mito
How to Replace the Front Headlight of the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Today, you will learn how to remove the front headlight of the Alfa Romeo Mito. Open the front bonnet and unscrew the securing screws located on the …
How to Replace the Headlight Bulb on the Alfa Romeo Mito
How to Replace the Headlight Bulb on the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Below are the steps that will allow you to remove and replace the headlight bulb on the Alfa Romeo Mito, following the instructions provided. First, …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos