Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Main Beam Bulbs on Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Headlight bulb

Replacing main beam bulbs on an Alfa Romeo Mito? Let's see how to remove the bulbs from inside the headlamp and how to replace them. Lift the bonnet and locate the headlamps. Remove the inspection cover from the rear of the headlamp. Take out the bulb holder from the headlamp and disconnect the damaged bulbs. Fit the new bulbs and insert the bulb holder back into the headlamp housing (always ensure the type and size are correct). Close the rubber caps at the rear of the front headlamp. Check the operation of the front headlamps. Use the control levers near the steering wheel.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

What Bulbs Does the Alfa Mito Use?
What Bulbs Does the Alfa Mito Use?
Alfa Romeo Mito (2008-2018 / MK 1) The type of bulbs used in the Alfa Mito are as follows: H7 for the dipped beam, H7 for the main beam, and H1 for the fog lights. There are kits avail…
How to Replace the Rear Bulbs on the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In today's tutorial, you will find the main instructions for removing and replacing the rear light bulbs on the Alfa Romeo Mito in simple steps. Firs…
How to Replace the Dipped Headlights in the Alfa Romeo MiTo
How to Replace the Dipped Headlights in the Alfa Romeo MiTo
Alfa Romeo Mito (2008-2018 / MK 1) In today's video, we will see how to replace the front bulbs of the Alfa Romeo MiTo. Specifically, we will install new, more efficient LED units. Fir…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos