Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Headlights in the Alfa Romeo MiTo

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Light bulb

Video tutorial

In today's video, we will see how to replace the front bulbs of the Alfa Romeo MiTo. Specifically, we will install new, more efficient LED units. First, open the bonnet.

Proceed by removing the rubber cover located behind the headlamp. Then disconnect the power connector.

Extract the old bulb. Insert the new unit, then reconnect all necessary connections.

Once reassembled, follow the same procedure with the other headlamp. Test them and adjust the beam according to your needs.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Replace the Dipped Beam Bulb in the Alfa Romeo Mito
How to Replace the Dipped Beam Bulb in the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) This guide shows you clearly and in detail how to replace the dipped beam bulb in the Alfa Romeo Mito. With the instrument cluster off, open the bonn…
Replacement of the rear light of the Alfa Romeo Mito
Replacement of the rear light of the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the rear light of the Alfa Romeo Mito. First, we open the rear hatch…
How to Replace the Front Headlamp Bulb on an Alfa Romeo Mito
How to Replace the Front Headlamp Bulb on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Today, we will look at the instructions needed to remove and replace the front headlamp bulb on an Alfa Romeo Mito. First, get inside the vehicle and…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos