Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb in the Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

Video tutorial

This guide shows you clearly and in detail how to replace the dipped beam bulb in the Alfa Romeo Mito. With the instrument cluster off, open the bonnet and using a ratchet spanner of the appropriate size, remove the battery terminals, the securing strap, and finally take out the battery from its housing.

This allows access to the headlamp bulb holder on the driver's side.

Next, remove the rear rubber protective cap, pull out the bulb holder, and extract the bulb to be replaced.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on an Alfa Romeo Mito
How to Replace the Front Headlamp Bulb on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Today, we will look at the instructions needed to remove and replace the front headlamp bulb on an Alfa Romeo Mito. First, get inside the vehicle and…
How to Replace the Daytime Running Light of the Front Headlamp on an Alfa Romeo Mito
How to Replace the Daytime Running Light of the Front Headlamp on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Follow this brief and simple guide to remove and replace the position bulb or daytime running light of the front headlamp on an Alfa Romeo Mito. Firs…
Replacing Daytime Running Lights on Alfa Romeo Mito
Replacing Daytime Running Lights on Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video, you will learn how to replace the daytime running lights on the Alfa Romeo Mito. Note that the bulb in question is a 21W5 halogen dual…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos