Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Instrument Cluster on an Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Instrument cluster

Video tutorial

How to dismantle the instrument cluster on an Alfa Romeo Mito? Follow these steps: remove the lower trim panel and unscrew the screws located underneath it with a screwdriver. Unscrew the securing screws of the instrument cluster (located at the top); after removing the screws, pull the piece out of the dashboard and disconnect the power cable located at the back of the instrument cluster.

Install a new piece or replace the LEDs/bulbs in the cluster and reassemble the original. Finally, reverse the assembly steps.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…
Where are the fuses located in the Alfa Romeo MiTo?
Where are the fuses located in the Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) The fuses in the Alfa Romeo MiTo are divided between two fuse boxes installed in the car: the first is located inside the cabin, behind the lower lef…
How to Replace the Dipped Beam Bulb in the Alfa Romeo Mito
How to Replace the Dipped Beam Bulb in the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) This guide shows you clearly and in detail how to replace the dipped beam bulb in the Alfa Romeo Mito. With the instrument cluster off, open the bonn…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos