Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install a GPS antenna and DAB radio on an Alfa Romeo MiTo.

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

Video tutorial

In this video, we will see how to install a DAB car radio and a GPS antenna on an Alfa Romeo MiTo: we will run the wires through the A-pillar on the passenger side door, first removing the weatherstripping. Then, using a plastic spatula, we will pull out the A-pillar and clean the areas where we will apply the double-sided tape.

We will need to remove the paint where the copper tab will rest, otherwise the antenna will not work, as the paint will act as a shield. Once the A-pillar is reassembled, we will pass the cables through the weatherstripping and let them exit under the glove compartment, where they will be secured with zip ties until they reach the radio.

Then, you can install the radio of your choice; you will just need to connect the cables.


Posted on 5 January 2026 by ScegliAuto


Related tutorials

Replacing the Antenna Base on an Alfa Romeo Mito
Replacing the Antenna Base on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video, we will see how to replace the antenna base on an Alfa Romeo Mito. First, remove the internal caps from the headlining of your vehicle…
Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…
…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light on the 2015 Hyundai i30

In this new guide for all you owners of a Land Rover Hyundai i30 second series (2015), you will discover the steps to manually reset the tyre pressure warning light. First, ensure there are no pressure leaks or punctures, or immediately inflate or replace the affected tyres. Next, start the car and drive a few miles to allow the sensor to take a new reading. Finally, turn off the car.

Watch the video!


by ScegliAuto

More videos