Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. Giulietta
  6. : How to replace oil and filters on Alfa Romeo Giulietta

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Engine oil
Operation: How to replace oil and filters on Alfa Romeo Giulietta

How to replace oil and filters on Alfa Romeo Giulietta? Let's see how to proceed with the replacement: open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood; we remove the cap over the engine head. We lift the car on a crick (column bridge); remove the air filter (as in the video) and replace it. Using a socket wrench, unscrew the large locking pin of the container cap where the oil filter is located (extract the worn oil filter) and place a new one. We unscrew the pin of the oil pan and let the liquid flow into a container. Finally we top up the new liquid (we measure the level with the dipstick) and close the front hood.


Posted on 10 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Giulietta 2010-2020 - Why did the engine oil light come on in the Alfa Romeo Giulietta? Read Answer
    • Giulietta 2010-2020 - What to do if the oil change light on the Alfa Romeo Giulietta comes on? Read Answer
    • Giulietta 2010-2020 - How many liters of engine oil go into the Alfa Romeo Giulietta 2.0 JTDm? Read Answer
    • Giulietta 2010-2020 - Why is the oil warning light flashing in the Alfa Romeo Giulietta? Read Answer
    • Giulietta 2010-2020 - What is the right amount of engine oil for the Alfa Romeo Giulietta 1.6 JTDm? Read Answer
    • Giulietta 2010-2020 - Flashing oil warning light on Alfa Romeo Giulietta: what to do? Read Answer
    • Giulietta 2010-2020 - What should I do when the "Change engine oil" warning light on the Alfa Romeo Giulietta lights up? Read Answer
    • Giulietta 2010-2020 - Oil warning light on Alfa Romeo Giulietta, what to do? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos