Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : Disassembly of the Alfa Romeo Giulietta central drawer

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Glove box
Operation: Disassembly of the Alfa Romeo Giulietta central drawer

In this video we will see how to remove the central glove box of the Alfa Romeo Giulietta. In fact, it has a very weak part of the car where springs or hooks often give way and break. The procedure for disassembly is very simple: open the drawer and we go to remove the internal mat. At this point, just unscrew the two screws and pull the drawer up: there will be two hooks and then pull to release them. Proceed with the reassembly of the new drawer, perhaps looking for a new reinforced type to avoid other breakages in the future!


Posted on 7 December 2023 by ScegliAuto



Disassembly of the central glove box on Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Did the central drawer on your Alfa Romeo Giulietta break for you too? No problem! Unfortunately the hooks are quite fragile and break easily, but to
How to replace the battery of the remote control of the Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) In order to replace the Alfa Romeo Giulietta remote control battery, press the button to raise the key; then, with a small slotted screwdriver, you h
Disassembly of the car radio of an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Let's see the disassembly of the car radio of an Alfa Romeo Giulietta and you don't know how to do it? Let's see in this video how to disassemble the

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos