Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : Replacement of license plate lights on Alfa Romeo Mito

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: License plate light
Operation: Replacement of license plate lights on Alfa Romeo Mito

Using a medium-small flat screwdriver, pry into the slot of the spotlight concerned by extracting it from its seat: be careful, however, because in this case it is essential to pry into the slot on your left, since the one on your right is fixed and if you work on in this area you risk breaking the joints of the spotlight. Once the taillight is removed, disconnect its connector. Accessing from the rear, now that you have the free light, you can open it and replace the light bulb. Reassemble the light and connect it, then check that it works correctly. Bye!


Posted on 5 February 2024 by ScegliAuto



Universal Alfa Romeo Mito license plate replacement
Alfa Romeo Mito (2008-2018 / MK 1) Today we will see how to disassemble the universal license plate holder of an Alfa Rmeo Mito; actually this tutorial can be applied to many types of
Replacement of Alfa Romeo Mito LED license plate lights
Alfa Romeo Mito (2008-2018 / MK 1) Replacing the license plate light bulbs with the LED type, in addition to giving the car a more modern and captivating look, will make the license pl
How to replace the license plate lamps of an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) How to replace the license plate bulbs of an Alfa Romeo Mito? Let's see in this video how to replace the damaged bulbs: we open the boot of the lugga

    Frequently Asked Questions

    • Mito 2008-2018 - How to replace the license plate light bulb in the Alfa Romeo MiTo? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos