Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : Removing the rear bumper Alfa Romeo Mito

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Rear bumper
Operation: Removing the rear bumper Alfa Romeo Mito

In this video we will see how to remove the front bumper of the Alfa Romeo Mito. First we go to identify the screws: inside the wheel arch we find three torx screws and a cross to unscrew. Now we unscrew the other screws present under the bumper (in total there are four). Finally we have to unscrew the last screws that are placed above the bumper (visible when opening the luggage compartment). Once this is done we can go and disassemble our bumper very delicately so as not to break the rear supports: we extract the license plate lamps. In the video you can also see the installation of the parking sensors!


Posted on 6 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Mito 2008-2018 - How to remove the rear bumper in the Alfa Romeo MiTo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos