Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : Replacement of mirrors on Alfa Romeo Mito

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Outside rearview mirror
Operation: Replacement of mirrors on Alfa Romeo Mito

Using the buttons inside the car relating to the adjustment of the mirrors, rotate the same towards the passenger compartment in order to have the necessary space, on the outside, to insert a plastic lever. Pry with it until you detach the mirror from the shell. Once this is done, be careful not to pull the mirror too much as you must first disconnect the rear cables. Now that it is disassembled, you can better see the shape of the interlocking hooks. To assemble the new mirror, connect its cables and forcefully fit it, making sure the joints fit together.


Posted on 7 February 2024 by ScegliAuto



Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to locate the precise locations of the fuses on your Alfa Romeo Mi
How do you replace the Alfa Romeo MiTo LPG filter?
Alfa Romeo Mito (2008-2018 / MK 1) In order to replace the Alfa Romeo MiTo LPG filter, you need to open the bonnet, disconnecting the battery and the LPG power management control unit
How to replace the front seat handle of an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Before we can start, we will have to go and open the front door of our Alfa Romeo Mito. So let's start by lifting and holding the handle. By doing so

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos