Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Keys to Remove the Radio from the Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Car stereo

The keys used to remove and extract the radio from its housing have standard measurements with a distance between the ends of approximately 35 mm. This distance corresponds quite accurately to the spacing between the holes located at the corners of the radios, designed specifically to facilitate their extraction from the housing. To operate, insert the two keys into the holes on either side of the radio, pushing them all the way in until you hear a click. At this point, start pulling both keys towards you while also pushing outward (the right key to the right and the left key to the left). This way, you will be able to extract the radio.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Uconnect 5 Radio in an Alfa Romeo Mito
How to Remove the Uconnect 5 Radio in an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video tutorial, you will see the procedure to remove the Uconnect 5 radio in an Alfa Romeo Mito, following a few simple steps that will allow…
Removing the Original Radio from Alfa Romeo Mito
Removing the Original Radio from Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video, you will learn how to remove the radio from the Alfa Romeo Mito. First, you will need specific tools: U-shaped hooks designed specific…
How to Remove the Blue & Me Control Unit in the Alfa Romeo MiTo
How to Remove the Blue & Me Control Unit in the Alfa Romeo MiTo
Alfa Romeo Mito (2008-2018 / MK 1) Learn how to remove the radio and the Blue & Me control unit in the Alfa Romeo MiTo. This tutorial also applies to other models in the group. Insert …

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos