Do it yourself
| ||||
|
Alfa Romeo Mito - Video tutorial
Model: Alfa Romeo Mito
MK 1
- Years 2008-2018 If the smart key of your Alfa Romeo Mito suddenly stops working due to the exhausted battery and you want to replace the latter independently, then you just need to put into practice the steps described in the following mini guide. First, get a small Phillips screwdriver and unscrew the screw located on the right side of the cover. Immediately after, remove the battery holder. At this point also remove the exhausted battery and replace it with the new one (model CR 2032). Finally, reinsert the battery holder inside the cover and re-tighten the screw removed previously.
Posted on 18 September 2022 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.069
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |