Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : Replacing the key battery on the Alfa Romeo Mito

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Battery
Operation: Replacing the key battery on the Alfa Romeo Mito

Let's find out in this video how to remove and replace the key remote control battery on the Alfa Romeo Mito, but also on the Fiat 500 and Lancia Ypsilon. First of all we take our remote control in hand and start to unscrew the screw that we find on the key slot, using a flat screwdriver; after which we extract the battery compartment that we find inside the remote control, as in the video. At this point we remove and replace the battery with the new one, of the right type (in this case a 3V CR 2032); insert it in the correct direction inside the battery holder and reassemble everything!


Posted on 15 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Mito 2008-2018 - How to replace the battery in the Alfa Romeo MiTo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos