Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery for the Alfa Romeo 159 - Brera

Model: Alfa Romeo 159 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Key

Video tutorial

Let's discover all the step-by-step instructions to disassemble and replace the battery of the remote key for the Alfa Romeo 159, as well as the Brera. First, take your remote and start by removing the physical key from inside it; then lever on the slot to remove the battery compartment, as shown in the video.

At this point, you can remove and replace the battery with a new one of the correct type (in this case, a CR 2032 3V); simply insert it in the correct direction and reassemble the battery in the remote!


Updated on 17 May 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Gear Knob on the Alfa Romeo 159 - Brera
Guide to Replacing the Gear Knob on the Alfa Romeo 159 - Brera
Alfa Romeo 159 (2005-2011 / MK 1) .. gear knob on the Alfa Romeo 159, as well as the Brera and some Fiat models. First, get inside the vehicle and use something thin to remove the small.. …
Replacing the Fuel Filter on Alfa Romeo 159 - Brera JTDM
Replacing the Fuel Filter on Alfa Romeo 159 - Brera JTDM
Alfa Romeo 159 (2005-2011 / MK 1) .. filter on an Alfa Romeo 159, as well as on the Brera, with a JTDM Diesel engine. First, open the bonnet of your car and locate the fuel filter, which.. …
How to Replace the Gear Knob on an Alfa Romeo 159 - Brera
Alfa Romeo 159 (2005-2011 / MK 1) .. gear knob on an Alfa Romeo 159, as well as on the Brera and many other Fiat group vehicles. First, get inside the vehicle and remove the plastic cover.. …

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos