Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter on Alfa Romeo 159 - Brera JTDM

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Diesel fuel filter

Today, in this video tutorial, you will learn how to remove and replace the fuel filter on an Alfa Romeo 159, as well as on the Brera, with a JTDM Diesel engine. First, open the bonnet of your car and locate the fuel filter, which is found at the top; then disconnect the fuel pipes and the electrical connector of the sensor by pressing on the tab. Next, use a ratchet spanner to undo the fixing bolt of the bracket, allowing you to extract the fuel filter; simply replace it with the correct new one and reassemble everything!

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil and oil filter of the Alfa Romeo 159 1.9 JTDm
How to replace the engine oil and oil filter of the Alfa Romeo 159 1.9 JTDm
Alfa Romeo 159 (2005-2011 / MK 1) Today we will see the instructions that will allow us to carry out the ordinary maintenance service, replacing the engine oil and oil filter, of the …
How to Remove the Fuel Filter on an Alfa Romeo 159
How to Remove the Fuel Filter on an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Follow these steps to remove the fuel filter on an Alfa Romeo 159: lift the car on a column lift or a suitable jack (if necessary), locate the fuel f…
How to replace the fuel pump in the Alfa Romeo 159 2.0 JTDm
How to replace the fuel pump in the Alfa Romeo 159 2.0 JTDm
Alfa Romeo 159 (2005-2011 / MK 1) This guide briefly outlines the instructions for removing and replacing the fuel pump in the Alfa Romeo 159 2.0 JTDm. First, open the rear doors of t…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos