Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pump in the Alfa Romeo 159 2.0 JTDm

Model: Alfa Romeo 159 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuel pump

Video tutorial

This guide briefly outlines the instructions for removing and replacing the fuel pump in the Alfa Romeo 159 2.0 JTDm. First, open the rear doors of the vehicle and begin by detaching and removing the rear seat by pulling it upwards; then remove the fuel pump cover by disconnecting the electrical connector for the float sensor and also disconnecting the fuel lines.

At this point, unscrew the fuel pump retaining ring, removing the submerged pump from the tank; replace it with the new original pump, making all necessary connections.


Posted on 10 May 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Filter on Alfa Romeo 159 - Brera JTDM
Replacing the Fuel Filter on Alfa Romeo 159 - Brera JTDM
Alfa Romeo 159 (2005-2011 / MK 1) Today, in this video tutorial, you will learn how to remove and replace the fuel filter on an Alfa Romeo 159, as well as on the Brera, with a JTDM Di…
Replacing the Thermostat on the Alfa Romeo 159 1.9 JTDM
Replacing the Thermostat on the Alfa Romeo 159 1.9 JTDM
Alfa Romeo 159 (2005-2011 / MK 1) In this video, we will see the main steps to remove and replace the thermostat on the Alfa Romeo 159, with a 1.9 JTDM engine. First, drain the coolan…
Guide to Replacing the Timing Belt on the Alfa Romeo 159 1.9 JTDM
Guide to Replacing the Timing Belt on the Alfa Romeo 159 1.9 JTDM
Alfa Romeo 159 (2005-2011 / MK 1) In today's video tutorial, learn how to remove and replace the timing belt on the Alfa Romeo 159 with a 1.9 JTDM engine. First, lift the vehicle and …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos