Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : Alfa Romeo 159 1.9 JTDM timing belt replacement guide

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Timing belt
Operation: Alfa Romeo 159 1.9 JTDM timing belt replacement guide

In today's video tutorial we will see how to remove and replace the timing belt of the Alfa Romeo 159, with 1.9 JTDM engine. First of all, we lift the car and remove the right front wheel, also removing the front wheel arch; we remove the V-belt and unscrew the screw of the crankshaft pulley, in order to remove it. At this point we remove the timing cover and the engine support, lifting the engine from below; then we take the references necessary for the disassembly and replacement of the belt, following the video to the end!


Posted on 8 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 159 2005-2011 - How many km does the Alfa Romeo 159 timing belt have to be changed? Read Answer
    • 159 2005-2011 - How much does it cost to replace the Alfa Romeo 159 timing belt? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos