Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Crankshaft RPM Sensor on an Alfa Romeo 159 1.9 JTDm

Model: Alfa Romeo 159 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Crankshaft position sensor

Video tutorial

In this guide, we will outline the steps to remove and replace the crankshaft RPM sensor on an Alfa Romeo 159 1.9 JTDm. First, open the bonnet and locate the sensor at the top of the engine bay, next to the timing cover. Disconnect its electrical connector and unscrew the sensor to remove it, as shown in the video.

Replace it with the new sensor, securing it properly; check its functionality and reset any engine fault light if necessary.


Posted on 26 July 2026 by ScegliAuto


Related tutorials

How to Change the Crankshaft Position Sensor on an Alfa Romeo 159 JTDM
How to Change the Crankshaft Position Sensor on an Alfa Romeo 159 JTDM
Alfa Romeo 159 (2005-2011 / MK 1) This guide shows how to remove and replace the crankshaft position sensor on an Alfa Romeo 159 with a JTDM engine, following these simple and quick s…
Replacing the Thermostat on the Alfa Romeo 159 1.9 JTDM
Replacing the Thermostat on the Alfa Romeo 159 1.9 JTDM
Alfa Romeo 159 (2005-2011 / MK 1) In this video, we will see the main steps to remove and replace the thermostat on the Alfa Romeo 159, with a 1.9 JTDM engine. First, drain the coolan…
Guide to Replacing the Timing Belt on the Alfa Romeo 159 1.9 JTDM
Guide to Replacing the Timing Belt on the Alfa Romeo 159 1.9 JTDM
Alfa Romeo 159 (2005-2011 / MK 1) In today's video tutorial, learn how to remove and replace the timing belt on the Alfa Romeo 159 with a 1.9 JTDM engine. First, lift the vehicle and …

How to Change the Time on the Peugeot 208

Today's guide will show you how to set the clock on the Peugeot 208's onboard computer, following the instructions below. First, get in the car and turn on the instrument panel; then press and hold the settings button on the panel for a few seconds until the time starts to flash, as shown in the video. At this point, press the left button to correctly set the time, adjusting the hour first and then the minutes; exit the onboard computer menu to save all the changes made!

Watch the video!


by ScegliAuto

More videos