Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Crankshaft Position Sensor on an Alfa Romeo 159 JTDM

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Crankshaft position sensor

This guide shows how to remove and replace the crankshaft position sensor on an Alfa Romeo 159 with a JTDM engine, following these simple and quick steps. First, lift the vehicle and locate the crankshaft position sensor, situated in the middle of the engine near the starter motor; then disconnect its electrical connector and unscrew the fixing bolt to remove it, as shown in the video. Now, replace the crankshaft position sensor with a new, correct type; apply the reverse procedure for reassembly!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Crankshaft RPM Sensor on an Alfa Romeo 159 1.9 JTDm
How to Replace the Crankshaft RPM Sensor on an Alfa Romeo 159 1.9 JTDm
Alfa Romeo 159 (2005-2011 / MK 1) In this guide, we will outline the steps to remove and replace the crankshaft RPM sensor on an Alfa Romeo 159 1.9 JTDm. First, open the bonnet and lo…
Replacing the Thermostat on the Alfa Romeo 159 1.9 JTDM
Replacing the Thermostat on the Alfa Romeo 159 1.9 JTDM
Alfa Romeo 159 (2005-2011 / MK 1) In this video, we will see the main steps to remove and replace the thermostat on the Alfa Romeo 159, with a 1.9 JTDM engine. First, drain the coolan…
How to replace the fuel pump in the Alfa Romeo 159 2.0 JTDm
How to replace the fuel pump in the Alfa Romeo 159 2.0 JTDm
Alfa Romeo 159 (2005-2011 / MK 1) This guide briefly outlines the instructions for removing and replacing the fuel pump in the Alfa Romeo 159 2.0 JTDm. First, open the rear doors of t…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos