Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Alfa Romeo Stelvio

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Warning light – error code

Video tutorial

If you have replaced the engine oil and the corresponding filter on this model, you need to reset the warning light that has turned on in the instrument cluster. To do this, you will find instructions in the video and description provided below.

The first step is to access the cabin and sit in the driver's seat, then turn on the ignition and press and hold the accelerator pedal, followed by pressing the brake pedal down five times in quick succession. After that, wait at least 10 seconds before releasing the accelerator pedal.

Then, turn off the ignition and turn it back on to check that the warning light has turned off.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) Start by prying off and removing the back of the key fob for your Alfa Romeo Stelvio to extract the physical emergency key. Next, using the extracted…
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) Follow these steps to reset the engine oil maintenance light on your Alfa Romeo Stelvio. First, get in the vehicle and press and hold the brake pedal…
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) To reset the service light on an Alfa Romeo Stelvio, enter the vehicle and ensure all doors are closed. Turn on the ignition without starting the eng…

Other guides you may be interested in

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos