Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on an Alfa Romeo Giulietta 1.4 Multiair?

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Timing belt

To replace the timing belt on an Alfa Romeo Giulietta, lift the bonnet to access the engine bay. The belt is located on the left side of the engine block, accessible by removing some spare parts and the plastic cover over the pulleys. These must be removed by loosening the central bolts so that the belt can be pulled off and replaced with a new spare part. After replacement, remount the pulleys and cover everything with the appropriate side plastic cover.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the timing belt of the Alfa Romeo Giulietta
How to replace the timing belt of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) The replacement of the timing belt is a complex job that requires attention and patience. To carry out the replacement of the timing belt of the Alfa…
Replacing the Timing Belt on Alfa Romeo Giulietta 1.4
Replacing the Timing Belt on Alfa Romeo Giulietta 1.4
Alfa Romeo Giulietta (2010-2020 / MK 1) Today, discover the main instructions on how to remove and replace the timing belt on an Alfa Romeo Giulietta 1.4. First, open the car's bonnet and s…
Replacing the Timing Belt on Alfa Romeo Giulietta 2.0 JTDM
Replacing the Timing Belt on Alfa Romeo Giulietta 2.0 JTDM
Alfa Romeo Giulietta (2010-2020 / MK 1) In today's video, we will see all the steps required to replace the timing belt, as well as perform a complete service (oil change, filters, alternat…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos